How about charming your way to a party? Well, you can make this possible by creating your own charms of silver earrings with the use of industrial tube wringer, which you can easily obtain in art supply shops and stores.

The required materials for this fun activity are the following: ruler, side cutters, needle file, flat nose pliers, round nose pliers, industrial tube wringer, two head pins, two circles (one inch round created from 24 or 26 gauge sheets), two briolette beads, and two earring findings.

For the two circles, you can either buy or purchase them. First, you need to cut two pieces of one inch thick circles from 24 or 26 sheets of metal or gauge sterling silver with the use of metal snips, a jeweler’s saw, or a bench shear. Next, drill two outlets in every charm, one for the ear pin or wire and the other one for the beaded drop. Firmly clutch the industrial tube wringer with the use of your right hand or you can also place the industrial tube wringer inside a little vise. Insert one fully cut sterling circle of sheet metal all the way through the tube wringer to generate texture.

Using the needle file, file the cut piece’s edges until it become really smooth. Perform these steps with the other circle. It’s vital to note that the pattern might appear different depending on the path you feed the metal sheets in the tube wringer, that’s why you need to carefully feed each sheet through the wringer in similar direction. To append the beaded dangle, get the briolette bead that was drilled in the center and insert a head pin through it. After which, make a loop at the head pin’s apex part and above the bead and slot it through the sheet’s lower hole. When the wrap is finished, you can then adjoin the earring finding to the hole in the top.

You can make a collection of silver earrings by performing these steps and casting different gemstones and other embellishments. Your earrings collection should look glowing and glimmering at all times, so it’s important that you clean your silver ear pieces once in a while.

Although silver ear jewelries are not prone to halitosis and bad breath, in actual fact, they can be cleaned well by using toothpaste. The technique that you will employ in cleaning your silver will highly depend on the item that you have, nevertheless most silver can be cleaned with a mixture of baking soda and water, or regular toothpaste. When cleaning your silver with the use of toothpaste, moisten your jewelry and then spread toothpaste on a soft toothbrush or small brush. Brush the silver, rinse, and then leave it to dry.

In actual fact, silver earrings can be effortlessly cleaned by utilizing some items that can be found in your kitchen. For stained or tarnished silver necklaces, bracelets, rings, and earrings, you can make it glisten like new with a simple mixture of tin foil, baking soda, and warm water. Although, there are many silver cleaning formulas and products in the market today, it is still best to use non-toxic items for keeping your earrings made from industrial tube wringer shimmering and stunning.